IPANC100 camera setup:
1. Connecting the camera
 - Connect the camera to the local network using a Cat 5 cable.
- Connect the power cable to the camera
2. Use any local computer terminal
- Insert setup disk included with the IP camera.
- Open the disk, then open the software folder and click on ipedit program.
- A new screen will pop up, click on update to search for the IP camera.
Wireless IP PTZ camera (Model: M6830M)
Setup:
To setup, first install the IPCam setup software from the driver disk. Connect the camera to the network using the RJ45 port and power it up. Open the IPCam setup software and click on "Find IP Cam". A list of available IP cam will show up in IPCam setup software¡¦s window. Setup the network accordingly. For wireless setup, it is necessary to connect to the IP PTZ camera first using the RJ45 port and configure the wireless setting on the IP camera. To do this, first open the IP cam by high light the desired IP camera from the list, then click the "Show IP Cam" button. A new browser window with IP camera software will pop up, log in to the camera, then go to configuration on the lower left side of the screen, select WLAN setting. Setup the wireless connection for the IP Camera accordingly to user's network settings, all entries must match entries in the IPCam setup software in order for the IP camera to function properly. After entering the network settings,
follow the on screen instruction to finish the configuration and reboot the camera.
To update the firmware of the IP Camera, first connect the IP camera to user's network and open the IP camera window in internet explorer or by using IPCam setup software. Download the new firmware (lzrz.bin) from the CCSGCorp's support page. Next, go to configuration in the IP camera window. Select admin setup and click on the "Link" button right next to firmware update. Browse and select the lzrz.bin file, then click update. The program will automatically upload the firmware, once the updating is complete, follow the on screen instruction to reboot.
| Question 1: |
Wireless IP camera does not work properly. |
| Answer: |
Wireless CCTV camera requires a great amount of resources to run properly. Further more, the wireless signal might be interrupted from time to time and cause the system to allocated additional resources to decode the incoming signal, this can lead to system crash or other recording problems. |
 |
|
