CCSGCorp.com - Special

1. 1/3" Color CCD Camera with 480/420 (high/standard) TV lines of resolution.
2. Camera direction and focus can be set manually.
3. Easy to install and adjust.
4. On ceiling: 360^o Panning range and 120^o tilting range.
On wall: 145^o(45^o left, 100^o right)
Pannng range and 180^o tilting range.

Imaging Pickup Sensor	1/3"-type CCD
Effective pixels (H x V)	NTSC high: 768x494 NTSC STD: 510x492	PAL high: 752x582 PAL STD: 510x582
Scanning System	NTSC high/standard-res. 2:1 interlance, V: 59.94Hz, H:15.734KHz	PAL high/standard-res. 2:1 interlance, V: 50Hz, H:15.625KHz
Sync System	Internal Sync
Lens	Fixed Lens (f=2.9mm, F 2.0)
Horizontal resolution	High-res.: 480TV Lines, Standard-res.: 420 TV Lines
Minimum Illumination	0.09lux
S/N Ratio	More than 50dB
AES(auto electric shutter)	NTSC: 1/60 ~ 1/100000sec, PAL: 1/50 ~ 1/100000sec
Gain Control	Auto
BLC(backlight compensation)	ON
White balance	ATW (Auto trace white balance)
Video output	1Vpp composite output 75 ohm
Audio	Yes
Power Requirement	DC12V +/- 10%
Power Consumption	2.0W(Max)
Operating temperature	-20 ^oC ~ 70 ^oC
Operating humidity	30% ~ 90%
Storage temperature	-40 ^oC ~ 85 ^oC
Dimensions	60 x 60.2(H) mm
Weight	68g approx
Accessory	Power & Video cable x1, Hex screw driver x1, anchor hold x3, Operating manual x1, Bracket x1

1. Lens Adjusting Ring: Adjusts the lens focus.
2. Ball Part
3. Video & Power Connector: Connects external source and the VIDEO IN connector of the Monitor.
4. Audio Connector: Connects to the AUDIO IN connector of other apparatus.
5. Knockout: Remove this part when you want to fix the connection between the Mount and the camera by using a cut or scissors.
6. Mount: Fix mini-Dome Camera onto the wall or the ceiling.

5. Knockout: Remove this part when you want to fix the connection between the Mount and the camera by using a cut or scissors.
7. Fasten hex screw: Fasten this screw from the knockout by using the hex screw driver provided to fix the connection between the Mount and the camera.
8. Holder hole: Fix the mini-Dome with the mount.
9. Camera Mounting Hole: Connects to the Mount.
10. Camera direction indicator